ThermoBond Cir-Kits, Combo SMT / Thru-Hole Kit

Terms and Definitions

Process guides covering basic knowledge such as tip selection, tip preparation, land preparation, etc.

Addresses critical maintenance and troubleshooting steps to keep you and your equipment working at top performance and efficiency.

A Selection for Mixed Technology Repairs

Complete Consisting of:

ThermoBond Frames (tin plated on one side):

Chip Resistor/Capacitor 1200-0147-01
SOICs, TSOPs 1200-0150-01
PLCCs, LCCCs, SOJs, Ceramic QFPs, Basic Cir-Kit Material and Dry Film Adhesive for Custom Shaping/Cutting 1200-0151-01
Straight Run 1200-0158-01
Fine Traces 1200-0159-01
Track Pad 1200-0161-01

Lap/Trace Frames (tin plated on both sides):

Fine Traces 1200-0165-01

Other Accessories:

Eyelets and Funnelets (#"s 4, 5, 6, 8, 10)
Abrasive Stick, 1 piece
Kapton Tape, 12.7mm (0.5") x 76.2mm (3.0"), 10 pieces
Fine Angled Tweezers 1100-0043-P1
Cutting Board 1143-0009
Upper Setting Tool 6000-0051
Setting Tool Guide 6000-0054
Lower Setting Tool, Funnelet 1132-0017-P1
Support Tool Base 1321-0054
Provise Kit (for cutting and scraping) 7016-0003-P1
ThermoBond Tips

120 V Part #: 6993-0180      NSN: 5999-01-446-1919
230 V Part #: 6993-0180      NSN: 5999-01-446-1919
  • Frame Material 1 oz copper foil
  • Dry Film Adhesive.04mm Thick (0.0015" Thick)
  • Protective Backing.08mm Thick (0.003" Thick)
  • Bonding Time 15 Seconds
  • Binding Temperature315°C (600°F) nominal
  • EyeletsOver 25 different Thru-Hole Eyelet sizes are available
  • PlatingAll ThermoBond frames come standard with 0.025mm (0.001") Tin plated on one side



Process Guides